FAQS ARE ANSWERED BELOW:

How clean should the surface be before the treatment starts?
Wash the surface with plenty of water. Normally this will be enough.
You can always try to work with the product to see how it goes. If the freeboard still is very dirty with marks after the fenders and yellow dots, we will recommend using a detergent suitable for gelcoat and repeating the treatment!

There are only 250 ml, is it enough?
The consumption of the material is minimal; therefore 250 ml is more than enough for a 30-foot.

Can I use it regularly on the deck and other areas, such as the mast and mounting of stainless steel etc.?
YES, it may well be used as a general cleaning product!

What will I achieve with this treatment?
You will experience that it is extremely effective to polish the freeboard as well as the product is easy to work with. That means, for example, that after treatment marks and dot at the freeboard are significantly easier to remove. In the end you will save time on polishing and subsequent cleansing.

Can it be used on coloured Gelcoat where the surface has faded?
YES, it is one of the strongest characteristics of the product! It restores the original colour and depth of strong faded Gelcoat surfaces with minimal effort!

Protects the product from UV radiation?
YES, it provides optimal protection against UV rays.

Should I use gloves?
YES, it is recommended to use gloves when working with chemicals.

Can we remove the treatment?
YES, a strong polishing will remove the treatment.

Duration of the treatment?
Normally half a year (a sailing season).

Is there a difference between the various providers of nano products?
YES, Nano is not just the nano, like all boats are not the same.